Anode choke designed for Bridge of Zen preamp to substitute the drain resistor for better microdynamics.

TECHNICAL FEATURES:

Inductance 40H @17Vrms/50hz

Airgap set: 35 mA

Idc max : 55 mA

Rdc :868 Ohm

Core material: CRGO annealed M6 silicon steel made in Europe.

Core size : EI48/20

Lamination thickness: 0.35mm

Dimensions:42mx50mmx40mm (76mm foot distance)

Footprint hole 5x6mm Weight: 320gr Wire length :350mm

Winding Wire: Double coated Grade 2 enamelled copper wire made in Europe.

Mounting: c cage clamp suitable for vertical or horizontal placement.

Please note that Horizontal placement is for underchassis, side mounting position only.

Anode choke special designed for parafeeding tubes ,in applications where low distortion and high voltage swing is desirable. Excellent results can be obtained using anode choke in line stages , or as a robust driver stage for driving output stages, using topollogies like multiple paralleled output tubes , or stages where cathode feedback from output transformer is employed.

TECHNICAL FEATURES:

Inductance 200H @17Vrms/50hz /20mA

airgap set: 20 mA

Idc max : 50mA

Rdc : 2750 Ohm

core material: low loss,high quality silicon steel made in Europe.

core size : EI60/30

lamination thickness: 0.35mm

dimensions:62mx57.5mmx51.5mm (86mm foot distance)

footprint hole 5x6mm

weight: 700gr

wire length :350mm

Winding Wire: Double coated Grade 2 enamelled copper wire made in Europe.

Mounting: c cage clamp suitable for vertical or horizontal placement. Please note that Horizontal placement is for underchassis, side mounting position only

Anode choke special designed for parafeeding tubes ,in applications where low distortion and high voltage swing is desirable. Excellent results can be obtained using anode choke in line stages, or as a robust driver stage for driving output stages, using topollogies like multiple paralleled output tubes , or stages where cathode feedback from output transformer is employed .

TECHNICAL FEATURES:

Inductance 125H @17Vrms/50hz

Airgap set: 5 mA

Idc max : 55 mA

Rdc :932 Ohm

Core material: CRGO annealed M6 silicon steel made in Europe.

Core size : EI48/20

Lamination thickness: 0.35mm

Dimensions:42mx50mmx40mm (76mm foot distance)

Footprint hole 5x6mm

Weight: 320gr

Wire length :350mm

Winding Wire: Double coated Grade 2 enamelled copper wire made in Europe.

Mounting: c cage clamp suitable for vertical or horizontal placement.

Please note that Horizontal placement is for underchassis, side mounting position only.

Anode choke special designed for parafeeding tubes ,in applications where low distortion and high voltage swing is desirable. Excellent results can be obtained using anode choke in line stages using tubes like EL84, 6SN7,6N1P,D3A,C3G,5687,6N6P, or as a robust driver stage for driving output stages, using topollogies like multiple paralleled output tubes , or stages where cathode feedback from output transformer is employed.

TECHNICAL FEATURES:

Inductance 95H @17Vrms/50hz

Airgap set : 36 mA

Idc max :120 mA

Rdc : 366 Ohm

Core material: high quality M6 grain oriented silicon steel (19000Gauss), made in Europe.

Core size : EI75/25

Lamination thickness: 0.35mm

Dimensions:77mx63mmx53mm

Weight: 1Kgr

Winding Wire: Double coated Grade 2 enamelled copper wire made in Europe.

Mounting: open frame clamps suitable for vertical or horizontal placement.

Anode choke special designed for parafeeding tubes ,in applications where low distortion and high voltage swing is desirable. Excellent results can be obtained using anode choke in line stages using tubes like El84,6SN7,6N1P,D3A,C3G,5687,6N6P, or as a robust driver stage for driving output stages, using topollogies like multiple paralleled output tubes , or stages where cathode feedback from output transformer is employed.

TECHNICAL FEATURES:

Inductance 45H @17Vrms/50hz

Airgap set: 20 mA

Idc max : 115 mA

Rdc : 268 Ohm

Core material: low loss,high quality silicon steel made in Europe.

Core size : EI60/30

Lamination thickness: 0.5mm

Dimensions:62mx51.5mmx55mm (86mm foot distance)

Footprint hole 5x6mm

Weight: 740gr

Wire length :350mm

Winding Wire: Double coated Grade 2 enamelled copper wire made in Europe.

Mounting: c cage clamp suitable for vertical or horizontal placement.

Please note that Horizontal placement is for underchassis, side mounting position only

Anode choke , special designed for parafeeding tubes working in high current , where using a conventional single ended output transformer would be out of question in terms of frequency response and distortion. Excellent results can be obtained using anode choke with tubes like GU81 or similar and the output transformer can be any push pull transformer with the appropriate load match.

TECHNICAL FEATURES:

Inductance 60H @17Vrms/50hz

Airgap set 500mA

Idc max :600 mA

Rdc : 107 Ohm

Core material: high quality low loss silicon steel made in Europe.

Core size : EI120/80

Lamination thickness: 0.35mm

Dimensions:105mmx135mmx125mm

Weight: 7.5Kgr

Winding method: split bobbin for low Csh capacitance

Winding Wire: Double coated Grade 2 enamelled copper wire made in Europe.

Mounting: open frame clamps suitable for vertical or horizontal placement.

Anode choke special designed for parafeeding tubes in push pull mode,in applications where low distortion and high voltage swing is desirable. Excellent results can be obtained using anode choke in driver stages using tubes like EL84, 6SN7,6N1P,D3A,C3G,5687,6N6P, for driving push pull output stages, in topollogies like multiple paralleled output tubes , or stages where cathode feedback from output transformer is employed.

TECHNICAL FEATURES:

Inductance 900H @17Vrms/50hz (anode1 to anode2)

Max dc imbalance : 4 mA

Idc max :90 mA( Anode to CT) or 90 mA per tube

Rdc : 902 Ohm (Anode1 to Anode2)

Core material: high quality M6 grain oriented silicon steel (19000Gauss), made in Europe.

Core size : EI75/25

Lamination thickness: 0.35mm

Dimensions:77mx63mmx53mm

Weight: 1.024Kgr

Winding Wire: Double coated Grade 2 enamelled copper wire made in Europe.

Mounting: open frame clamps suitable for vertical or horizontal placement.

Anode choke special designed for parafeeding tubes ,in applications where low distortion and high voltage swing is desirable. Excellent results can be obtained using anode choke in line stages using tubes like 6SN7,6N1P,D3A,C3G,5687,6N6P, or as a robust driver stage for driving output stages, using topollogies like multiple paralleled output tubes , or stages where cathode feedback from output transformer is employed.

TECHNICAL FEATURES:

Inductance 100H @17Vrms/50hz (82H@20mA , 70H@25mA, 62H@30mA)

Airgap set: 15 mA

Idc max : 70 mA

Rdc : 653 Ohm

Core material: low loss,high quality silicon steel made in Europe.

Core size : EI60/30

Lamination thickness: 0.5mm

Dimensions:62mx51.5mmx55mm (86mm foot distance)

Footprint hole 5x6mm

Weight: 745gr

Wire length :350mm

Winding Wire: Double coated Grade 2 enamelled copper wire made in Europe.

Mounting: c cage clamp suitable for vertical or horizontal placement.

Please note that Horizontal placement is for underchassis, side mounting position only