Single Ended 5K Output Transformer(Pair) 25W, ultralinear
Designed for EL34 6L6 KT88 6550 in triode or ultralinear mode
TECHNICAL FEATURES:
Primary Impedance: 5K
Secondary Impedance:8 Ω
Ultralinear tap :42%
Primary Inductance Lp=39H @17Vrms/50hz measured with Idc=120mA
Leakage inductance : 10mH
Airgap set for : 120mA
Primary Dc resistance: 315 Ohm
Max Dc current :150mA
Maximum output power :25W
Frequency Response: 20Hz-22Khz -1dB (Rsource=5K) 14Hz-30Khz -2dB
Core material:High quality CRGO silicon steel M6 , DIN EN 10107 ,made in Europe
Core size : EI 96/50 ,lamination thickness /0.35mm
Dimensions:110mmx96mmx83mm
Weight :3Kgr per transformer
Winding method :layer wound with insulation insertion between every layer.
Winding Wire: Double coated Grade 2 enamelled copper wire made in Europe Wound in Precision Multi section winding, for reduced leakage inductance and high dielectric strength.
Mounting: open frame clamps suitable for vertical or horizontal placement
Tube amplifier projects and related circuits use high voltage and contact with high voltages can cause serious injury or death. If you are not experienced with high voltage safety and working with high voltage, this is not the project for you and you act at your own risk and responsibility.